-
Aug 15,2022
Second stage of plywood hot press The second stage of the hot-press cycle is the pressure-holding stage. The pressurization time specified in the plywood hot-pressing process specification refers to this stage, whi...
View More
-
Nov 9,2022
Different types of Plywood hot press machine-Multi-layer hot press machine The multi-layer hot press plywood machine is a kind of flat pressing method. The characteristics of the multi-layer hot press are: high production efficiency, wide thickness range, and easy control and adjustment of the equipment. However, its structure is complex and huge, and it must be equipped with a loading...
View More
-
Apr 20,2023
Roller veneer dryer: It uses a series of upper and lower rollers to convey the veneer through the dryer. All the lower rollers are driven by a motor through a transmission device through a chain, while the upper rollers are driven by the lower rollers through a pair of long-toothed gears. Therefore, the upper rollers can be used with different veneer thicknesses float up and down within a certain ...
View More
-
May 2,2023
Hot plate veneer dryer: used for drying the thick veneer manufactured by LVL, usually the roller dryer is used first, and then the hot plate dryer is used. This process can not only ensure the quality of the veneer, but also improve the efficiency of veneer drying. The host structure of the hot plate dryer is basically the same as that of the ordinary plywood hot press machine. In order to shorten...
View More
-
Jun 5,2023
During the LVL production process, the wood loss of each main process is roughly as follows: 1. Sawing loss (truncation, sawdust): generally 2%-3% 2. Rotary cutting loss (wood core, broken veneer): The proportion of wood core and broken veneer is related to the material and log diameter. LVL uses low-grade timber and small-diameter timber, but because veneer lengthening and spindleless veneer peel...
View More
-
Aug 29,2023
Hot press veneer dryer machine, which have been studied for a long time, can be used both for drying sawn timber and for drying veneer. The hot press dryer combines the dual effects of pressurization and contact heat transfer. There are two main types of veneer hot-press drying: continuous hot-press dryer and repeated hot-press dryer. The characteristics of veneer drying by hot press...
View More
-
Oct 11,2023
The veneer peeling machine is the main machine of plywood manufacturing. Its working condition affects the quality of veneer and plywood. The quality of the wood peeling maintenance work directly affects the quality and output of the veneer. 1. The impact of the wear of the rotary wood peeler machine on the quality of the veneer The maintenance of the rotary veneer peeling machine during productio...
View More
-
Sep 8,2024
Various defects are prone to occur during the wood peeling process of veneers, so there are veneer quality problems. The quality of veneers is mainly measured based on the following indicators: veneer thickness deviation (i.e. processing accuracy), veneer back crack degree, veneer back roughness and veneer transverse tensile strength. The first two of these indicators are the most important veneer...
View More
