Problems and solutions of Spindleless Wood Veneer Machine 3 Problem: The wod veneer is periodically uneven.  Reason: The sunny and shadow surfaces of the wood veneer are too heavy; the peeling knife of veneer lathe/veneer machine  is too low or too high, and the clearance between the single and double roller bearings is too large.  Solutions:  Correctly adjust the height o...

The wood bark is loose and has no use value in the production of plywood. The phloem of the bark tends to block the knife door when peeling, and the rotary knife becomes blunt quickly, and the rotary peeling cannot be carried out normally; the bark often contains metal objects and sand and other debris, such as direct rotary peeling will damage the rotary knife. Affect normal wood veneer peeling a...

   Laminated veneer lumber is a structural material made by processing wood into thicker veneers, drying, sizing, forming blanks along the grain, and laminating and gluing. Because it is basically formed along the grain, it is also called parallel plywood. Because it is similar to the performance of glued wood, it is also called veneer glued wood. Its manufacture is very similar to plywo...

The purpose of wood debarking is mainly to facilitate rotary cutting and improve the quality of veneer. The bark is generally composed of outer bark, phloem and cambium. Because the structure of bark is completely different from that of wood (xylem), bark is not only useless in plywood production, but also because its phloem is mostly composed of elongated fibers, if the wood section is directly p...